The Kicker 8" Coaxial Tower Speaker System is UV treated for protection against the sun, includes 7 color LED grille system which is upgradeable to 20 Colors and 19 Lighting Modes with the KMLC remote control (sold seperately) and 300 Watt Max peak power handling. ASTM G154 400 hr. Accelerated UV Test. ASTM B117 200 hr. Salt Fog Test. This KXMA amplifier delivers as much as 125 watts into four full-range channels, or 250 watts into two sets of bridged channels. The Kicker Real Marine standard means your amplifier is purpose-built for your boat. This amp comes complete with anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections. Kicker amp power kits feature top-quality Hyper-Flex power, ground and turn-on cables. A heavy-duty AFS fuse holder, fuse, terminals and zip ties come in the kit as well. This Eight Gauge Amp Kit comes complete with Full Spec wire, hardware and fusing. Get all the current your amp needs with this complete power solution.All kits include pure, full-spec OFC (oxygen-free copper) cabling for max power transfer, superior bass response and signal clarity.

Speakers:

• 8" Coaxial Tower Speaker System (Pair)
• Power Handling: 300 Watt Peak
• Power Handling: 150 Watt RMS 
• Grille With Seven-Color LED System Included
• Upgrade to 20 Colors, 19 Lighting Modes with KMLC remote (optional)
• UV-Treated Polypropylene Woofer With Santoprene Surround
• UV-Resistant Polymer Basket
• ASTM G154 400 hr. Accelerated UV Test
• ASTM B117 200 hr. Salt Fog Test
• One-Inch PEI Tweeter
• 316L Stainless Mounting Hardware Included
• Impedance: 4 Ohms
• Sensitivity: 92dB
• Frequency Response: 30 - 21,000Hz

Amplifier:

• Class D Amplifier
• Variable 24dB Crossover
• DSP-Controlled Preamp
• KickEQ 6dB Variable Bass Boost
• Stainless-Steel Mounting Hardware Included
• POWER [watts/ch], 2 OHM STEREO: 125 x 4
• POWER [watts/ch], 4 OHM STEREO: 75 x 4
• POWER [watts/ch], 4 OHM BRIDGED MONO:: 250 x 2
• DYNAMIC POWER [watts]:: 700
• FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
• INPUT SENSITIVITY: High Level 250mV-10V, Low Level 125mV-5V
• SIGNAL-TO-NOISE RATIO: 95dB
• ACTIVE CROSSOVER: (amp 1) 24dB/octave, variable 10-5kHz w/ 10x switch, selectable high pass, low pass or all pass
• ACTIVE CROSSOVER: (amp 2) 24dB/octave, variable high pass 10-500Hz, variable low pass 40-5kHz w/10x switch, selectable high pass, low pass, all pass or band pass
• KickEQ BOOST: Variable 0-6dB, centered @ 40Hz (Only on amp 2)

Amplifier Wiring Kit:

• 17 ft 8 awg blue power wire
• 4 ft 8 awg gray ground wire
• Self tapping bolt and washer
• FHS fuse holder with 60 amp fuse L=3.06", W=1.33", H=1.32"
• 17 ft 16 gauge remote wire
• 6x 6" zip ties
• 8 awg firewall grommet
• 1x 18-22 awg butt connector