Subwoofer:

• Uses a Sealed or Ported Enclosure
• Square Sub Design Moves 20% More Air Than Round Subwoofers
• Easily Mounts Under or Behind a Seat
• Dual Voice Coil Design
• Ribbed Santorin Surround Resists Heat And Degrading
• Bumped Top Plate For More Excursion & Smoother Performance
• SoloKon Cone With 360-Degree Back Bracing
• UniPlate Solid Pole Piece & Backplate For Excellent Heat Dissipation
• Durable Steel Basket
• Size (IN.,CM): 10, 25
• Impedance (OHMS): 2 DVC
• Recommended Amplifier Power (watts RMS): 500
• Peak Power (watts, per ANSI/CTA-2031-A): 1000
• Sensitivity (dB 1w/1m): 85.98
• Frequency Response (Hz): 25-100
• Mounting Depth (IN.,CM): 3-3/4, 9.5
• Mounting Cutout, Square (IN.,CM): 9-5/16, 23.7
• Min Rec Sealed Box Volume (CU. FT., Liters): 0.4, 11.3
• Max Rec Sealed Box Volume (CU. FT., Liters): 1.0, 28.3
• Min Rec Vented Box Volume (CU. Ft., Liters): 1.25, 35.4
• Max Rec Vented Box Volume (CU. Ft., Liters): 1.75, 49.6
• What's in the box?: one 10-inch subwoofer, one owner's manual, two stickers

Amplifier:

• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look
• Power (watts/ch) 4 Ohm: 600x1
• Power (watts/ch) 2 Ohm: 1200x1
• Power (watts/ch) 1 Ohm: 1200x1 +/-10%
• CXRC Remote Bass Capable (sold sep.): yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L): 12, 30.6
• Frequency Response (Hz): 25-200Hz
• Input Sensitivity: 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: 95dB
• Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: 25Hz @24dB/octave
• KickEQ™ Boost: Variable 0-6dB @40Hz

Amplifier Wiring Installation Kit:

• 17 ft 4 awg blue power wire
• 4 ft 4 awg gray ground wire
• Self tapping bolt and washer
• FHS fuse holder with 100 amp fuse L=3.06", W=1.33", H=1.32"
• 17 ft 16 gauge remote wire
• 16.4 ft KI RCAs
• 12 ft Q series 12 awg speaker wire
• 6x 6" zip ties
• 4 awg firewall grommet
• 1x 18-22 awg butt connector
• 4x 12 awg fork terminals
• 2x blue fork terminal boots
• 2x black fork terminal boots