Amplifier:

• Efficient Class-D amplifier
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ 6dB variable bass boost for those additional low frequencies
• FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Power (watts/ch) 4 Ohm: 150x1
• Power (watts/ch) 2 Ohm: 300x1
• Power (watts/ch) 1 Ohm: 400x1
• Frequency Response (Hz): 25-200, +0/-1dB
• Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
• Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: 25Hz @24dB/octave
• KickEQ Boost: Variable 0-6dB @40Hz

Remote Bass Control:

• Compatible with the KEY500.1 and any CX, DX or PX KICKER amp equipped with a REMOTE BASS jack
• Cable Length - 19.75 feet

Included In Amp Kit:

• 17 ft 4 awg blue power wire
• 4 ft 4 awg gray ground wire
• Self tapping bolt and washer
• FHS fuse holder with 100 amp fuse L=3.06", W=1.33", H=1.32"
• 17 ft 16 gauge remote wire
• 16.4 ft KI RCAs
• 12 ft Q series 12 awg speaker wire
• 6x 6" zip ties
• 4 awg firewall grommet
• 1x 18-22 awg butt connector
• 4x 12 awg fork terminals
• 2x blue fork terminal boots
• 2x black fork terminal boots

• Single Subwoofer (in, cm): (1) 8, 20
• Impedance (Ohms): 4 Dual Voice Coil
• Amplifier Power (watts RMS): 100-200
• Peak Power (watts): 400
• Frequency Response (Hz): 30-500
• Sensitivity (dB 1w/1m): 83.6