Amplifier:

• Efficient Class-D amplifier
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ 6dB variable bass boost for those additional low frequencies
• FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Power (watts/ch) 4 Ohm: 150x1
• Power (watts/ch) 2 Ohm: 300x1
• Power (watts/ch) 1 Ohm: 400x1
• Frequency Response (Hz): 25-200, +0/-1dB
• Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
• Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: 25Hz @24dB/octave
• KickEQ Boost: Variable 0-6dB @40Hz

Dual Bass Remote Control:

• For use with all KICKER mono amplifiers (or amps with mono channels) and powered subwoofers
• Controls one or two mono-channel amps that utilize a 3.5mm level controller input
• Single knob with high-end, metal look

Included In Amp Kit:

• 17 ft 4 awg blue power wire
• 4 ft 4 awg gray ground wire
• Self tapping bolt and washer
• FHS fuse holder with 100 amp fuse L=3.06", W=1.33", H=1.32"
• 17 ft 16 gauge remote wire
• 16.4 ft KI RCAs
• 12 ft Q series 12 awg speaker wire
• 6x 6" zip ties
• 4 awg firewall grommet
• 1x 18-22 awg butt connector
• 4x 12 awg fork terminals
• 2x blue fork terminal boots
• 2x black fork terminal boots

Amplifier:

• TYPE: Thin-profile
• WOOFER SIZE (in, cm):12, 30
• IMPEDANCE (Ohms): 2
• Amplifier Power (watts RMS): 500
• Peak Power (watts): 1000
• SENSITIVITY (dB 1w/1m): 98
• Tuning Frequency [Hz]: 35