Amplifier:

• Power (watts/ch), 1 Ohm stereo: 500
• Power (watts/ch), 2 Ohm stereo: 300
• Power (watts/ch), 4 Ohm stereo: 150
• Frequency Response (Hz): 10-160
• Signal-to-Noise Ratio: 90dB

Remote Bass Control:

• Compatible with the KEY500.1 and any CX, DX or PX KICKER amp equipped with a REMOTE BASS jack
• Cable Length - 19.75 feet

Included In Amp Kit:

• 17 ft 4 awg blue power wire
• 4 ft 4 awg gray ground wire
• Self tapping bolt and washer
• FHS fuse holder with 100 amp fuse L=3.06", W=1.33", H=1.32"
• 17 ft 16 gauge remote wire
• 16.4 ft KI RCAs
• 12 ft Q series 12 awg speaker wire
• 6x 6" zip ties
• 4 awg firewall grommet
• 1x 18-22 awg butt connector
• 4x 12 awg fork terminals
• 2x blue fork terminal boots
• 2x black fork terminal boots

Stereo Line Output Converter:

• Accepts up to 55 watts (16 volts) of input signal
• Fully compatible with standard radios and most smart radios*
• Delivers up to an 8-volt output signal
• Flat 20Hz-20kHz frequency range at all volume levels
• Includes a powerful 100 milli-amp, remote turn-on wire
• No 12V power source needed
• LED indicator for DC offset turn-on