6.5" SPEAKERS

• 6.5" DRVN Series 2-way Coaxial Marine Speakers.
• Peak Power: 300 watts per pair / 150 watts each.
• RMS: 100 watts per pair / 50 watts each.
• Recommended Power Range: 5 - 50 watts RMS per channel.
• Carbon Mica Cone Woofer, 16 cm (6-1/2'')
• Rubber Surround.
• 4 ohms impedance.
• 1" Poly-Ether Imide Balanced Dome Tweeter.
• Voice coil size and type.
• 8.1oz. Ferrite magnet motor structure.
• Sound Pressure Level: 87dB/W.m.
• Frequency Response: 60 -18,400 Hz.
• Sensitivity: 87dB.
• Mounting Depth: 61.5 mm (2-7/16")

BLUETOOTH CONTROLLER

• KICKER 43PXBTC Bluetooth Interface & Controller PXBTC
• Frequency Response: (-3db): 20Hz-20KHz
• THD (250mV 1kHz, AUX input, 2.5V output): <0.01%
• S/N Ratio (AU-Weight) ref 5V, minimum volume: >100dB
• 3.5mm Stereo Aux Input sensitivity: 500mV
• RCA Output Voltage - Max. (1kHz input, 1% THD): 5V
• Total Mounting Depth: 2-9/16 inch (65 mm)
• Protrusion from Mounting Surface: 5/8 inch (16 mm)
  
  

4-CHANNEL AMPLIFIER

• 4-Channel Marine Amplifier
• Conformal Coated Circuitry
• Circuit Separation Construction
• Large LPF Coil
• Variable High/Low-Pass Filter
• 400W Maximum Power Output
• RMS Power Output (4 ohm): 45W x 4
• RMS Power Output (2 ohm): 45W x 4
• RMS Power Output (Bridged 4 ohm): 90W x 2
• Class D
• Signal-to-Noise Ratio: >82dB
• CEA-2006 Compliant
• Load Impedance: 2 - 8 Ohms
• HPF: 50Hz - 200Hz (-12dB/oct)
• LPF: 50Hz - 200Hz (-12dB/oct)
• RCA Input: Ach L/R, Bch L/R
• Input Sensitivity: .2 - 5V
• Dimensions (W x H x D): 5-11/16" x 1-3/4" x 3-7/8"

8 GAUGE AMP INSTALL KIT

• 6 Foot length T-Spec OFC Power and Ground Wire
• 60 Amp Fuse
• T-Spec V8MANL fuse holder
• Pre-terminated ring terminals
• Two 4 foot pieces of 16 gauge OFC speaker wire
• Comes with two 47-ohm 1/2 watt resistors
• Installation hardware is included