This JVC marine amplifier is rated waterproof and dustproof. A Drain Tunnel Structure is employed for creating a gap between the amplifier and the installation surface. This prevents saltwater and sand from accumulating on the bottom, increasing corrosion protection. The amplifier mounting section is made of 15/64 inch die-cast material to suppress the amplification of vibration. In addition, the thick heat-transfer sheet was also placed to the substrate and the Aluminum die cast heat sink to suppress the vibration of the substrate. Thicker terminal connection points and increased wire size enables maximum current flow and higher output for better low frequency response and cleaner output. High Quality PMLCAP’s (Polymer Multi-Layer Capacitors) are utilized to lower distortion levels, improving the overall listening experience at higher volumes, while maintaining the integrity of the sound. Magnetic Shielding for the output coils reduce radiated noise, delivering smooth and accurate sound.

General Features:

• Max Power Output: 600W
• Rated Power Output @ Stereo (4Ω): 50W x 4 (20Hz–20kHz, ≤1.0% THD)
• Rated Power Output @ Stereo (2Ω): 75W x 4 (1kHz, ≤1.0% THD)
• Rated Power Output @ Bridged (4Ω): 150W x 2 (1kHz, ≤1.0% THD)
• Speaker Impedance: 4Ω (2Ω to 8Ω allowable)
• Speaker Impedance for Bridged connection: 4Ω to 8Ω allowable
• Frequency response (+0, –3dB): 10Hz–35kHz
• Input Sensitivity (RCA): 0.2V-5.0V
• Signal to noise ratio: 89dB
• Low pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
• High pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
• Operating voltage: 12V DC car battery
• Current consumption: 26A
• Operational temperature range: –10°C – 60°C
• Dimensions (W × H × D): 7-13/16" x 1-15/16" x 4-1/8"
• Weight: 1.6kg (3.5lbs)
• Waterproof & Dustproof: IP66, IP67