Subwoofer:

• Uses a Sealed or Ported Enclosure
• Square Sub Design Moves 20% More Air Than Round Subwoofers
• Easily Mounts Under or Behind a Seat
• Dual Voice Coil Design
• Ribbed Santorin Surround Resists Heat And Degrading
• Bumped Top Plate For More Excursion & Smoother Performance
• SoloKon Cone With 360-Degree Back Bracing
• UniPlate Solid Pole Piece & Backplate For Excellent Heat Dissipation
• Durable Steel Basket
• Size (IN.,CM): 10, 25
• Impedance (OHMS): 2 DVC
• Recommended Amplifier Power (watts RMS): 500
• Peak Power (watts, per ANSI/CTA-2031-A): 1000
• Sensitivity (dB 1w/1m): 85.98
• Frequency Response (Hz): 25-100
• Mounting Depth (IN.,CM): 3-3/4, 9.5
• Mounting Cutout, Square (IN.,CM): 9-5/16, 23.7
• Min Rec Sealed Box Volume (CU. FT., Liters): 0.4, 11.3
• Max Rec Sealed Box Volume (CU. FT., Liters): 1.0, 28.3
• Min Rec Vented Box Volume (CU. Ft., Liters): 1.25, 35.4
• Max Rec Vented Box Volume (CU. Ft., Liters): 1.75, 49.6
• What's in the box?: one 10-inch subwoofer, one owner's manual, two stickers

Amplifier:

• Mono Subwoofer Amplifier
• Preamp and speaker-level inputs
• Extruded Heatsink
• Low- and High-Level Inputs
• Switchable Bass EQ
• Onboard Active Crossover
• Full Conventional Protection Suite (OCP, OTP, OVP, UVP, DC)
• Fuse rating: 20A x 1
• 300 watts RMS x 1 at 2 ohms ( 4-ohm rating unavailable)
• Variable Low-pass filters: 32-320 Hz, 12 dB/octave
• Variable bass boost: 0-12 dB at 45 Hz

Amplifier Wiring Installation Kit:

• 17 ft 4 awg blue power wire
• 4 ft 4 awg gray ground wire
• Self tapping bolt and washer
• FHS fuse holder with 100 amp fuse L=3.06", W=1.33", H=1.32"
• 17 ft 16 gauge remote wire
• 16.4 ft KI RCAs
• 12 ft Q series 12 awg speaker wire
• 6x 6" zip ties
• 4 awg firewall grommet
• 1x 18-22 awg butt connector
• 4x 12 awg fork terminals
• 2x blue fork terminal boots
• 2x black fork terminal boots