Amplifier:

• Class A/B full-range channels
• Class D bass channel
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS)
• Power (watts/ch) 4 Ohm Stereo: 65x4
• Power (watts/ch) 2 Ohm Stereo: 90x4
• Power (watts/ch) 4 Ohm Mono: 180x2
• Power (watts/ch) 4 Ohm Mono Sub Ch: 150x1
• Power (watts/ch) 2 Ohm Mono Sub Ch: 300x1
• Frequency Response (Hz): 10Hz-20kHz
• Frequency Response (Hz – Sub Ch.): 25Hz-200Hz
• Signal-to-Noise Ratio: 90dB
• Sub Channel: Low Pass 50-200Hz @ 12dB/Octave
• Subsonic Filter: 25Hz @24dB/Octave
• KickEQ Boost: Variable 0-6dB @40Hz

Dual Bass Remote Control:

• For use with all KICKER mono amplifiers (or amps with mono channels) and powered subwoofers
• Controls one or two mono-channel amps that utilize a 3.5mm level controller input
• Single knob with high-end, metal look

Included In Amp Kit:

• 17 ft 4 awg blue power wire
• 4 ft 4 awg gray ground wire
• Self tapping bolt and washer
• FHS fuse holder with 100 amp fuse L=3.06", W=1.33", H=1.32"
• 17 ft 16 gauge remote wire
• 16.4 ft KI RCAs
• 12 ft Q series 12 awg speaker wire
• 6x 6" zip ties
• 4 awg firewall grommet
• 1x 18-22 awg butt connector
• 4x 12 awg fork terminals
• 2x blue fork terminal boots
• 2x black fork terminal boots

Stereo Line Output Converter:

• Accepts up to 55 watts (16 volts) of input signal
• Fully compatible with standard radios and most smart radios*
• Delivers up to an 8-volt output signal
• Flat 20Hz-20kHz frequency range at all volume levels
• Includes a powerful 100 milli-amp, remote turn-on wire
• No 12V power source needed
• LED indicator for DC offset turn-on