PACKAGE BUNDLE INCLUDES: 2x Kicker 48CWRT672 CompRT 6.75" 300 Watts Peak Power 2 Ohm Dual Voice Coil Car Audio Subwoofer, Kicker CXA1200.1 1200 Watt Class D Mono Subwoofer Car Audio Amplifier W/T-Spec v8 SERIES V-8-RAK8 Amp Installation Kit
Subwoofer:
- SIZE [in, cm]: 6-13/16, 17.3
- IMPEDANCE [Ohms]: 2 DVC
- Recommended Amplifier Power (watts RMS): 150
- Peak Power (watts, per ANSI/CTA-2031-A): 300
- SENSITIVITY [dB 1w/1m]: 82.6
- MOUNTING DEPTH [in, cm]: 2-3/4, 7
- MOUNTING DIAMETER [in, cm]: 5-5/8, 14.3
- MIN SEALED BOX VOL [cu. ft, L]: 0.18, 5.1
- MAX SEALED BOX VOL [cu. ft, L]: 0.75, 21.24
Amplifier:
- Efficient Class-D amplifier
- Three-second turn-on/off delay to eliminate unwanted interference
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ™ 6dB variable bass boost for those additional low frequencies
- 24dB subsonic filter for protection from potentially damaging frequencies
- FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
- Accepts up to 40-volt input signal
- Small footprint for easier installation
- Compatible with CXARC Remote Bass Control
- Vertical mounting hardware included for another unique look
- Power (watts/ch) 4 Ohm: 600x1
- Power (watts/ch) 2 Ohm: 1200x1
- Power (watts/ch) 1 Ohm: 1200x1 +/-10%
- CXRC Remote Bass Capable (sold sep.): yes
- Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L): 12, 30.6
- Frequency Response (Hz): 25-200Hz
- Input Sensitivity: 250mV-10V (Low Level), 1V-40V (High Level)
- Signal-to-Noise Ratio: 95dB
- Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
- Subsonic Filter: 25Hz @24dB/octave
- KickEQ™ Boost: Variable 0-6dB @40Hz
Amplifier Wiring Installation Kit:
- 17FT V8 8 AWG OFC matte solid silver multi-strand power wire
- 3FT V8 8 AWG OFC matte solid black multi-strand ground wire
- 17FT 18 AWG OFC blue remote turn-on wire
- 17FT V8 noise rejecting twisted rca cable with precision molded ends and split tip
- Proprietary V8 MINI ANL fuse holder with 40A fuse
- Nickel Plated 8 AWG seamed crimp ring terminal with 8.5mm hole and silver boot connected at battery end
- Nickel Plated 8 AWG seamed crimp ring terminal with 8.5mm hole and black boot connected at ground
- 8 AWG spade terminals with silver and black boots for amp connection
- Miscellaneous connectors terminals and wire ties
Additional Information |
Amp Channel |
Mono
|
Amp Freq Response at RMS Power |
25-200Hz
|
Amp Included |
Yes
|
Amp Power at 2 Ohms |
1200 Watts RMS x1 at 2 Ohm:
|
Amp RMS Power Output |
1200
|
Amplifier Class |
D
|
Brand |
Kicker
|
Item Weight |
19.35
|
Manufacturer |
T-Spec
|
Manufacturer Part Number |
2CWRT672-CXA12001
|
Top-Mount Depth |
2.75"
|
Warranty |
1 Year Manufacturer Warranty
|
Water Resistant |
No
|
Be the first to review!
Thank you. Your product review will be visible once it has been approved.