10" LOADED SUBWOOFER

• Ported enclosure loaded with one 10" Subwoofer
• 3/4" medium-density fiberboard construction covered with carpet
• 4-ohm total impedance
• power handling: 50-300 watts RMS (600W peak power)
• Frequency response: 30-500 Hz
• sensitivity: 93.8 dB
• 21-1/2"W x 15"H x 7-5/8"D1 x 4"D2
• warranty: 1 year
• Ported enclosure loaded with one 10" Subwoofer
• 4 Mounting brackets
• Four 1" Self-tapping pan head screws
• Eight 5/8" Self-tapping flat head screws
• Specification and mounting information

AMPLIFIER

• Prime Series Class D Monoblock Car Amplifier
• Power Rating: 
• -300 watts RMS @ 4-ohms.
• -500 watts RMS @ 2-ohms.
• CEA-2006 compliant amplifier
• MOSFET power supply.
• Cast aluminum heatsink.
• Muted turn on.
• Short circuit protection.
• Efficient Class-D circuit topology.
• 12dB/octave Butterworth crossover.
• RCA pass-thru outputs.
• On-board Punch EQ with +18dB boost @ 45Hz.
• High level inputs.
• Remote PLC (Punch Level Control)
• 0°/180° Phase Switch.
• Real time output and power supply thermal sensing.
• Over current protection.
• Frequency Response: 20 - 250 Hz +/- 1 dB.
• Efficiency: 89% @ 4-ohm.
• Total Harmonic Distortion: <1.0%
• Signal to Noise Ratio: >100 dB.
• Damping Factor: >200 dB.
• Input Sensitivity: 150 mV - 4V.
• 4 Gauge power/ground connectors.
• 8-gauge speaker wire terminals.

AMP KIT

• 20 ft. 8 GA Red Power Cable.
• Competition High Quality Fuse Holder.
• 1/4" Ring Terminal.
• 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
• 16 ft. 18 GA Blue Turn-On Wire.
• 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
• 30 ft. Speaker Wire 5/16" Ring Terminal.
• 6 ft. Split Loom Tubing (20) 4" Wire Ties